Puffed Sticks Making Machine-manufacture,factory,supplier from China

(Total 24 Products for Puffed Sticks Making Machine)
This Fried cheetos kurkure niknak processing line can use corn grits instead of the powder material to produce the irregular stick sanack. This extruder is specially designed with one screw only for such cheetos, kurkure, or niknak. After shaped from extruder, the products will be sent into the rotary sifter to take down extra grits sticky on the surface. The waste grits can be collected and used again as raw materials. So this processing line can lower down the production cost.
  Contact Now
OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.
  Contact Now
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.
  Contact Now
This puff snack making device can use corn, rice, and distinctive grain powder as uncooked materials to deliver right away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very well-known within the marketplace.
  Contact Now
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.
  Contact Now
This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.
  Contact Now
This puff snack making device can use corn, rice, and other grain powder as raw substances to provide immediately puffed snacks in variou shapes, along with chip, ball, ring, stick, flake, flower, and so forth. after dried and flavroed, the snacks are crispy and tasty which are very popular inside the marketplace.
  Contact Now
This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market. This Puff Snack Machine Is Characteristics Of Simple Opeation, Reasonable Structure, Low Consumption, And High Efficiency, Which Make It The Best Choice For Medium Factory.Schematic diagram of production line
  Contact Now
Fried Wheat Flour Snacks Making Machine  uses corn powder, corn starch, and rice powder as most important cloth which can be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy flavor, wealthy nutrition and digestible shape are very famous with many people all around the global.
  Contact Now
Textured vegetable protein making machine is made from low temperature defatted soy flour, wheat protein, soybean and remoted protein because the number one uncooked materials, and produced thru mixing, cooking, and extruding in the double-screw extruder under excessive temperature and high pressure. the fiber soy protein is in sturdy muscle fiber shape with excessive tenacity that may keep suitable water and oil absorption potential, so it may be appreciably used in meat, fast food, straight away meals, fillings as vegetarian meat.
  Contact Now
This puff snack making machine can use corn, rice, and other grain powder as uncooked substances to produce immediately puffed snacks in variou shapes, such as chip, ball, ring, stick, flake, flower, and many others. after dried and flavroed, the snacks are crispy and tasty which might be very popular in the marketplace. this puff snack machine is characteristics of simple opeation, reasonable shape, low consumption, and excessive efficiency, which make it the best preference for medium manufacturing unit.Schematic diagram of production line
  Contact Now
This puff snack making gadget can use corn, rice, and different grain powder as uncooked materials to deliver proper away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which is probably very well-known in the market.
  Contact Now
Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.
  Contact Now
Twist Snacks Making Machine uses corn powder, corn starch, and rice powder as most important cloth which can be extruded, punched into triangle, spherical, rectangular shapes, after which baked and flavored. such snacks with crispy flavor, wealthy nutrition and digestible shape are very famous with many people all around the global.
  Contact Now
Slanty Snacks Making Machine uses potato starch, corn starch as main materials to produce a variety of twice extrusion food in different shapes which are popular in the market, such as crispy pea, shell, screw, square tube, round tube, wave, etc. This process line is characterized by unique technics, rational configuration, high automation and stable performance. It can finish steaming, extruding and shaping in one step without a boiler.
  Contact Now
The Fried Puffed Food Production Line Is Suitable For Extruding Flour And Other Raw Materials Through An Extruder, Rolling And Cutting Into Various Shapes Through A Compound Molding Machine, And Then Seasoning After Frying, Making Delicious Snack Foods. The Equipment Design Of The Production Line Is Reasonable And The Operation Is Simple. This Equipment Can Also Produce Products Of Various Shapes Such As Rice Crackers, Triangles, Gourd-Shaped, Small Fish Crisps, Golden Horns And So On. The Product Is Beautiful In Appearance, Crispy In The Mouth, And Rich In Nutrition.
  Contact Now
This technique line is newly designed and produced with overseas superior generation. it has stepped forward the dangers of import system consisting of huge funding and excessive production value. this line makes use of corn starch, wheat flour, potato starch as substances to supply"bugles", "net", "potato chips" and plenty of different 3-D compound extrusion food. this line can be in comparison with the ones import equipments. beneath the same features, its fee is only one 10th of that of import equipment.
  Contact Now
This puff snack making device can use corn, rice, and distinctive grain powder as uncooked materials to deliver right away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very well-known within the marketplace.
  Contact Now
This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.
  Contact Now
This puff snack making machine can use corn, rice, and other grain powder as raw substances to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very famous in the marketplace. this puff snack machine is characteristics of easy opeation, reasonable shape, low intake, and excessive performance, which make it the nice choice for medium production unit.Schematic diagram of production line
  Contact Now
Breadcrumb is mainly used for fried beefsteak and chicken as frying dressing. this line is especially designed and developed to perform from the fabric to very last shaping routinely with less manpower, with out waste,lower production price, and higher manufacturing efficiency.
  Contact Now
Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance.   technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70~80㎏/hDimensions: 1700×1000×1800mm
  Contact Now
Popcorn process line can use the corn seed directly puffed into popcorn, and then use different flavorings like salt, cream, caramel, etc. to make various tastes. Popcorn is a kind of nor-fried, nutritious, healthy, crispy, tasteful snack, so it is one of the most favorite leisure foods of many people.Schematic Diagram of Production Line
  Contact Now
Breadcrumb is specifically used for fried beefsteak and bird as frying dressing. this line is specially designed and evolved to perform from the fabric to very last shaping robotically with much less manpower, with out waste,lower production price, and better manufacturing performance.
  Contact Now
Relate News
Food freeze-drying machine is short for food vacuum freeze-drying machine. Food freeze-drying technology originated in the 1930s. At present, food freeze-drying machine has become an important drying equipment for food deep processing.Freeze-dried food is fast frozen, vacuum ice dehydration, preserving the original color, aroma, taste, nutrition and appearance of the original material, and has good rehydration, and does not contain any additives, can be stored at room temperature for a long time, is an ideal natural health food.
Puffed food appeared in the market in the 1960s. Later, it quickly became popular in various countries because of its unique taste, simple eating and various patterns. It has long occupied the most frequently purchased snack types with chocolate, wafers and other foods.However, the long-term sales advertisements and puffed food have left us with a stereotyped image. Recently, many consumers said that when they saw the product category as "oil-containing puffed food", they were very worried about whether it was an unhealthy snack.
Puffed food has long been welcomed by many consumers because of its good taste, unique and diverse taste, easy to carry, easy to eat, and long shelf life.1. Nutritious cereal puffed foodFat, carbohydrate and protein are the main components of traditional puffed food. From the perspective of composition structure, it is a food with high fat, high calorie and low crude fiber. In addition, most of the traditional puffed snacks contain a lot of monosodium glutamate, salt and food additives.
①Continue to large-scale development. The upsizing includes several aspects such as large conveying capacity, large single machine length and large conveying dip Angle. The length of the hydraulic transmission device has reached more than 440 kilometers. The single length of belt conveyors has been nearly 15 kilometers, and there have been a number of "belt conveyor" formed by connecting A and B. Many countries are exploring long distance, large volume of continuous conveying material more perfect conveyor structure.② Expand the scope of use of conveyor.
When the puffed and extruded food machine is operating, we must first think about a problem, that is, how to use the food extruder correctly in the process of using the machine, so I will explain the suitable processing method for novices.1. When it is found that the spiral groove is blocked, do not stop the machine immediately, it should run for a while after stopping the feeding, and then stop the machine when there is a burning smell. In this way, the nozzle and the screw sleeve can be prevented from being seized.
DRIED FOOD IN SNACK FOODNowadays, when we walk into shopping malls and supermarkets, we will find potato chips, shrimp sticks, snow cakes, preserved fruits, dried fruits, fish fillets, dried meat and other kinds of snack foods with exquisite packaging, fashion and unique taste. With the improvement of people's living standards, snack food has quietly become the new favorite of consumption, and various dried snack foods are becoming more and more common in the market.
Indirect puffed snack foods are also known as "third generation snack foods". The production of these foods has a common characteristic: they are not puffed directly after coming out of the extruder template. Additional processing steps are required to give it the appearance or texture, which generally includes frying or hot air puffing processes to remove moisture to obtain the final texture.
Now puffed food has always been very popular, and many companies and businessmen have seen the profits. In fact, puffed food machinery is the same as food machinery, not only to meet the production conditions that the machinery and equipment should have, but also to meet the various conditions required for food processing. Judging from the current development phenomenon, the procurement of extrusion and puffing machinery should be considered from four aspects.1. Scale applicability.
The new-style tea market, which is considered to be a high-quality track, seems to be a bit "glamorous in appearance, but full of challenges in reality". Recently, Nai Xue's tea released its first annual report after its listing. The adjusted net profit loss of 145 million yuan is somewhat surprising, but industry insiders also said that with the brand's pilot and a series of automated tea-making equipment this year, the store's operating results will be improved. Release it slowly.
After pre -processing the materials are crushed, wet, mixed, and preheated, the driving force of the squeezing screw is used to form a specially designed mold hole to form a certain shape and organizational state, which is called extrusion processing.The basic principle of squeezing and puffed is: grain raw materials containing a certain amount of water, sealed in the patch machine, for heating, pressurizing or mechanical effects, so that the material is in a high temperature and high pressure state.