Corn Puffed Extruder Machine-manufacture,factory,supplier from China

1. Before operating the corn equipment bulking machine, remove the head, movement, lead screw and other parts, clean them up, dry them and then install them.2. Idling for 1 to 2 minutes first when operating, put the raw materials into the feed mouth, not too fast, when the ring groove of the spiral shaft head is filled, stop feeding, friction preheating. Wait until the nose temperature rises and the pressure inside the cabin builds up before feeding.3. Feed should be continuous and uniform, material must be dry, must pay attention to.4.

There is only one screw in the barrel of the single screw extruder, it is by the friction of the screw and the barrel of the material to transport materials and form a certain pressure. In general, the friction coefficient between the material and the barrel is greater than that between the material and the screw. Otherwise, the material will be wrapped in the screw together to rotate and not play the role of forward propulsion.Screw is divided into three sections: feeding (feeding) conveying section, compression melting section, metering homogenization section.

Now puffed food has always been very popular, and many companies and businessmen have seen the profits. In fact, puffed food machinery is the same as food machinery, not only to meet the production conditions that the machinery and equipment should have, but also to meet the various conditions required for food processing. Judging from the current development phenomenon, the procurement of extrusion and puffing machinery should be considered from four aspects.1. Scale applicability.

　　The products produced by the breakfast cereal production line are a brittle food with a smooth taste and a strong grain flavor. Breakfast cereal corn flakes are processed by a special structured extruder, which further improves yield, quality, and raw material adaptability compared to traditional production methods, making it possible to strengthen trace elements such as vitamins and minerals. This production line has the characteristics of multiple optional models, flexible equipment configuration, wide range of raw materials, multiple product types, and simple operation.

Corn chip is a kind of brittle food, with good rehydration, external flushing not rotten, smooth taste, grain flavor rich.

When the puffed and extruded food machine is operating, we must first think about a problem, that is, how to use the food extruder correctly in the process of using the machine, so I will explain the suitable processing method for novices.1. When it is found that the spiral groove is blocked, do not stop the machine immediately, it should run for a while after stopping the feeding, and then stop the machine when there is a burning smell. In this way, the nozzle and the screw sleeve can be prevented from being seized.

Puffed food appeared in the market in the 1960s. Later, it quickly became popular in various countries because of its unique taste, simple eating and various patterns. It has long occupied the most frequently purchased snack types with chocolate, wafers and other foods.However, the long-term sales advertisements and puffed food have left us with a stereotyped image. Recently, many consumers said that when they saw the product category as "oil-containing puffed food", they were very worried about whether it was an unhealthy snack.

Screw extruder is mainly used in the production of starch extruded food, protein extruded food and extruded feed in the food industry, and can also be used as a special chemical or biochemical reactor.Starch puffed foodThe starch in the grain will gelatinize (αize) under the high temperature and pressure of the extruder. The results showed that the degree of starch αization was more than 98% and the crude fat decreased by 60% or even disappeared after the puffed corn flour. Water solubility increased by more than 40%. Therefore, extruder can replace roller dryer to produce gelatinized starch.

For extruder equipment, the model specifications of extruder equipment are classified according to the diameter of the screw. For the sake of explanation, plastic is used as an example below, but the same is true for food extruders.That is to say, the screw diameter of the extruder equipment is the model specification of the extruder equipment. For example, the screw diameter of the 90-type extruder equipment is 90mm.

Extruder belongs to a kind of equipment for processing puffed food. It is a kind of equipment for processing puffed food, such as processing rice, corn, soybean, wheat, etc., in daily life.